AL 01
Office partitions
Full height and half height partitions with glass or board infill, set out around the existing beam and ceiling grid.
- Cabins
- Meeting rooms
- Open floors
Joinery from one contractor and metalwork from another leaves a gap nobody owns, and the owner pays for it at handover. We run all three trades with the same crew, so lines meet where the drawing says they meet.
3
Materials, one crew
4
Interior packages
100%
Site measured openings
1
Accountable vendor
A wardrobe built to a plan dimension fouls the skirting on day one. Every opening is measured on site before anything is cut, and shutters, hardware and laminates are signed off by the owner first.
Two and three shutter units for bedrooms where a swing door would block the walkway. Runs floor to ceiling so nothing collects dust on top.
Partitions ordered to a drawing arrive short and get packed out with filler strips that everyone can see. We cut and assemble the sections on site, so the frame matches the wall you actually have.
Full height and half height partitions with glass or board infill, set out around the existing beam and ceiling grid.
Sliding and openable units glazed and gasketed on site, with the hardware fitted the same day.
Suspended grid ceilings with light, duct and sprinkler openings set out before the tiles drop in.
Internal louver screens for service shafts, AC returns and lobby dividers where you need air through but not sight through.
Most partition complaints come back to the frame, not the panel. A thin section flexes, the gasket lifts and the panel rattles every time a door shuts. We size the section against the panel weight and the span, then show you the profile before the order goes in.
Painted counters look fine on handover day and rust at the joint by the second monsoon. Stainless holds up where water and traffic never stop, provided the grade and the finish are picked for the room rather than the brochure.
Kitchen counters, service tables, sinks and shelving for restaurants, canteens and hospital pantries. Welds are ground back and polished so nothing catches a cloth.
Sheet cladding for lift jambs, lobby walls and service corridors, with joints set out to a grid so the panel lines read straight down the wall.
Internal handrails, corner guards and edge trims where walls take trolleys and daily contact.
Frames, brackets and equipment stands fabricated to your sketch when nothing standard fits.
Five vendors on one floor means five programmes and five people to chase when the ceiling contractor blocks the electrician. Whole floor fit-out on one order, ceiling through to final polish.
One programme.
One bill. One handover date.
Send the floor plan and the possession date on WhatsApp. You get a room by room scope, the finish schedule and a fixed price in writing before any material is ordered.
Tap any panel for a larger view. Every one of these was measured, built and snagged by the same crew, across homes, offices and commercial kitchens in and around Bengaluru.
Answer three questions and the result updates as you go. Nothing is sent anywhere until you tap through to WhatsApp.
01 What kind of space is it?
02 How much of it are we doing?
03 What matters most here?
Room by room joinery with the finishes approved from physical samples before anything is cut.
No material is ordered until the finish is approved, and no shutter is cut until the opening is measured. You know what is happening before it happens.
Every opening measured on site rather than scaled off the plan. Beams, ledges and out of square walls get recorded then, not discovered on installation day.
You get a room by room layout with unit sizes, internals and a written scope. Anything outside it is called out as extra before you sign.
Laminates, veneers, hardware and steel finishes picked from physical samples. Nothing is ordered on a screenshot.
One price for the approved scope, with start and handover dates in writing. Payment stages are tied to work completed, not to the calendar.
Wood, aluminium and steel handled by the same team in one sequence. No waiting for a second vendor to free up the room.
Joints checked, shutters aligned, surfaces cleaned and keys handed over. Snags found at handover are closed before the final payment.
Straight answers on price, timelines, materials and what happens when something goes wrong after handover.
Joinery is priced per square foot of the finished unit, worked out from the measured size and the material you approve. Partitions and ceilings go by running foot or area. Turnkey floors are priced as one scope with a line for each package, so you can see what each part costs. Every quote states what is included and what is not, which is where most interior disputes start.
A two or three bedroom flat with joinery, ceiling, flooring and polish usually runs four to eight weeks from the date finishes are approved. An office floor depends on the partition count and the electrical scope. The date is committed in writing once the scope is signed, and any delay caused by our side does not become your cost.
Yes, and it is common for offices and running shops. Cutting is kept off site where possible, the work area is sheeted off, and noisy activity is scheduled around your hours. Tell us your operating hours before the programme is fixed so the sequence is built around them rather than adjusted later.
Either works. Most clients take supply and install together, which keeps one party responsible if a panel or a hinge fails. If you already have material on site or a preferred brand, we quote labour and installation against it. The quote states the brand and grade for every item so a substitution cannot happen quietly.
Workmanship is covered by us. Hardware and boards carry the manufacturer warranty, and the brand and warranty period are written into your quote rather than mentioned verbally. You call one number either way, and we deal with the manufacturer if it is a material claim.
Bengaluru and the surrounding districts are our regular working area. Sites further out are taken on for full floor and commercial scopes where the volume justifies keeping a crew on location. Send the location on WhatsApp and we will tell you straight away whether we can take it.
No forms to fill. Send a floor plan, a rough sketch or just the room sizes on WhatsApp. You get a scope and a price before any material is ordered.
Talk to the person who
will run your job.
No call centre and no handoff. The estimate comes from the same team that measures your site and hands over the keys.
Send whatever you have. A photo of the room and a rough measurement is enough to start a conversation, and we come to site for the exact numbers.
We reply the same working day